- Welcome to community.cognetic.com.
Cognetic Awarded one of Houston's Largest Tech Companies
Recent posts
#51
Kaspersky / Download Link for Kaspersky En...
Last post by bflores - September 16, 2016, 03:25:50 PMDownload Link for Kaspersky Security Center
http://aes.kaspersky-labs.com/english/administrationkit/ksc10/
http://me.kaspersky.com/en/product-updates/security-center
Download Link for Kaspersky Enterprise Security 10 Workstation
http://aes.kaspersky-labs.com/english/endpoints/kes10windows/
http://me.kaspersky.com/en/product-updates/windows-endpoint-security
#52
Kaspersky / Create Kaspersky Security Cent...
Last post by bflores - March 22, 2016, 12:31:18 PMBrian,
Thank you for contacting Bomgar support.
I wanted to pass along the following information that will assist you in making Bomgar a trusted appliacation:
Under certain circumstances, it is not possible to make changes to Kasperky's security settings when remotely connecting to a system with Kaspersky installed.
This behavior is caused by a security setting within Kaspersky (Self-Defense) which blocks external software from making changes to security files, memory processes, and etc This is not only affecting Bomgar, but to all remote control software.
The appropriate solution for this problem is to add Bomgar to the list of Trusted applications for Kaspersky's Trusted Zone as described here: http://support.kaspersky.com/us/7834. The following executables should be allowed:
%ProgramData%\Bomgar-scc-*\bomgar-scc.exe
%ProgramData%\Bomgar-scc-*\bomgar-sc*.exe
The Allow interaction with application interface option must be checked.
As always, if you need additional assistance, please do not hesitate to let us know.
If you need immediate assistance, please start a web session at https://help.bomgar.com. Please reference the Incident number in the subject line of this email for faster support.
Regards,
Bomgar Support Team
Thank you for contacting Bomgar support.
I wanted to pass along the following information that will assist you in making Bomgar a trusted appliacation:
Under certain circumstances, it is not possible to make changes to Kasperky's security settings when remotely connecting to a system with Kaspersky installed.
This behavior is caused by a security setting within Kaspersky (Self-Defense) which blocks external software from making changes to security files, memory processes, and etc This is not only affecting Bomgar, but to all remote control software.
The appropriate solution for this problem is to add Bomgar to the list of Trusted applications for Kaspersky's Trusted Zone as described here: http://support.kaspersky.com/us/7834. The following executables should be allowed:
%ProgramData%\Bomgar-scc-*\bomgar-scc.exe
%ProgramData%\Bomgar-scc-*\bomgar-sc*.exe
The Allow interaction with application interface option must be checked.
As always, if you need additional assistance, please do not hesitate to let us know.
If you need immediate assistance, please start a web session at https://help.bomgar.com. Please reference the Incident number in the subject line of this email for faster support.
Regards,
Bomgar Support Team
#53
Vmware / How to Install Dell OpenManage...
Last post by bflores - January 21, 2016, 01:51:41 PMHow to Install Dell OpenManage Server Administrator (OMSA) 8.2 to Vmware ESXi 6
(SEE .PDF ATTACHMENT)
(SEE .PDF ATTACHMENT)
#54
Office / Microsoft Office Online Produc...
Last post by bflores - January 20, 2016, 02:01:52 PM(MICROSOFT OFFICE ONLINE PRODUCT ACTIVATION LINKS)
https://microsoft.gointeract.io/interact/index?interaction=1461173234028-3884f8602eccbe259104553afa8415434b4581-05d1&accountId=microsoft&appkey=196de13c-e946-4531-98f6-2719ec8405ce&Language=English&CountryCode=en&CountryLanguage=EN&startedFromSmsToken=BJDlfy5&sessionID=100997131&token=R40Rns
NEW LINK AS OF 06-21-2022
(HOW TO CHANGE OFFICE 2016 PRODUCT KEY VIA COMMAND PROMPT CMD.EXE)
X86 cscript "C:\Program Files (x86)\Microsoft Office\Office16\ospp.vbs" /inpkey:XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
X64: cscript "C:\Program Files\Microsoft Office\Office16\ospp.vbs" /inpkey:XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
(HOW TO CHANGE OFFICE 2013 PRODUCT KEY VIA COMMAND PROMPT CMD.EXE)
X86: cscript "C:\Program Files (x86)\Microsoft Office\Office15\ospp.vbs" /inpkey:XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
X64: cscript "C:\Program Files\Microsoft Office\Office15\ospp.vbs" /inpkey:XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
bflores account last used: 19
start with: 23 for next
https://microsoft.gointeract.io/interact/index?interaction=1461173234028-3884f8602eccbe259104553afa8415434b4581-05d1&accountId=microsoft&appkey=196de13c-e946-4531-98f6-2719ec8405ce&Language=English&CountryCode=en&CountryLanguage=EN&startedFromSmsToken=BJDlfy5&sessionID=100997131&token=R40Rns
NEW LINK AS OF 06-21-2022
(HOW TO CHANGE OFFICE 2016 PRODUCT KEY VIA COMMAND PROMPT CMD.EXE)
X86 cscript "C:\Program Files (x86)\Microsoft Office\Office16\ospp.vbs" /inpkey:XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
X64: cscript "C:\Program Files\Microsoft Office\Office16\ospp.vbs" /inpkey:XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
(HOW TO CHANGE OFFICE 2013 PRODUCT KEY VIA COMMAND PROMPT CMD.EXE)
X86: cscript "C:\Program Files (x86)\Microsoft Office\Office15\ospp.vbs" /inpkey:XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
X64: cscript "C:\Program Files\Microsoft Office\Office15\ospp.vbs" /inpkey:XXXXX-XXXXX-XXXXX-XXXXX-XXXXX
bflores account last used: 19
start with: 23 for next
#55
Exchange Server / Configure Internal Clients to ...
Last post by bflores - March 23, 2015, 11:27:18 AM(STEP 1 - FROM EXCHANGE MANAGEMENT SHELL - EMS)
Set-ClientAccessServer -Identity CAS_Server_Name -AutodiscoverServiceInternalUri https://mail.yourdomain.com/autodiscover/autodiscover.xml
Set-WebServicesVirtualDirectory -Identity "CAS_Server_Name\EWS (Default Web Site)" -InternalUrl https://mail.yourdomain.com/ews/exchange.asmx
Set-OABVirtualDirectory -Identity "CAS_Server_Name\oab (Default Web Site)" -InternalUrl https://mail.yourdomain.com/oab
(STEP 2 - RECYCLE IIS APPLICATION POOLS)
1.) Open IIS Manager by clicking Start, then enter inetmgr.
2.) Expand the server and expand Application Pools, then right-click on MSExchangeAutodiscoverAppPool, and select Recycle.
(SOURCE)
https://support.microsoft.com/en-us/kb/940726
Set-ClientAccessServer -Identity CAS_Server_Name -AutodiscoverServiceInternalUri https://mail.yourdomain.com/autodiscover/autodiscover.xml
Set-WebServicesVirtualDirectory -Identity "CAS_Server_Name\EWS (Default Web Site)" -InternalUrl https://mail.yourdomain.com/ews/exchange.asmx
Set-OABVirtualDirectory -Identity "CAS_Server_Name\oab (Default Web Site)" -InternalUrl https://mail.yourdomain.com/oab
(STEP 2 - RECYCLE IIS APPLICATION POOLS)
1.) Open IIS Manager by clicking Start, then enter inetmgr.
2.) Expand the server and expand Application Pools, then right-click on MSExchangeAutodiscoverAppPool, and select Recycle.
(SOURCE)
https://support.microsoft.com/en-us/kb/940726
#56
Windows / Windows Network Connectivity S...
Last post by bflores - March 20, 2015, 12:06:19 PM(ADD BELOW DOMAIN TO ALLOW THE WINDOWS OS TO CHECK IF INTERNET IS WORKING)
msftconnecttest.com
msftncsi.com
(OLD OUTDATED INFO IS BELOW)
The Windows Network Connectivity Status Indicator (NCSI) Network Awareness will:
Request to: http://www.msftncsi.com/ncsi.txt
Expects to Receive: Text containing "Microsoft NCSI"
Request for DNS name resolution of: dns.msftncsi.com
Expects to Resolve to: 131.107.255.255
(SOURCE)
https://technet.microsoft.com/en-us/library/cc766017(v=ws.10).aspx
(TAGS)
Limited or no connectivity
Yellow Exclamation Point on Network, PC, or Computer Icon
msftconnecttest.com
msftncsi.com
(OLD OUTDATED INFO IS BELOW)
The Windows Network Connectivity Status Indicator (NCSI) Network Awareness will:
Request to: http://www.msftncsi.com/ncsi.txt
Expects to Receive: Text containing "Microsoft NCSI"
Request for DNS name resolution of: dns.msftncsi.com
Expects to Resolve to: 131.107.255.255
(SOURCE)
https://technet.microsoft.com/en-us/library/cc766017(v=ws.10).aspx
(TAGS)
Limited or no connectivity
Yellow Exclamation Point on Network, PC, or Computer Icon
#57
Netgear / How to Configure Netgear VLANs...
Last post by bflores - December 19, 2014, 05:10:13 PM(HOW TO CONFIGURE NETGEAR VLANS)
1.) Go to management IP of Netgear (i.e. 172.16.0.104)
2.) Login
3.) Click "Switching" then "VLAN"
4.) Click on "Advanced" then "VLAN Membership"
5.) Choose VLAN ID in drop down list (i.e. "300")
6.) Then Click on "Port" purple hyperlink.
7.) Make sure "U" is specified for the Shoretel phone that is plugged in.
8.) Click Apply
9.) Click on "Port PVID Configuration" in left hand column.
10.) Check the g interace number the phone is plugged into. (This will prefill the Interface field).
11.) Change the PVID (1 to 4093) to the VLAN you want it to be (i.e. "300")
12.) Click Apply
1.) Go to management IP of Netgear (i.e. 172.16.0.104)
2.) Login
3.) Click "Switching" then "VLAN"
4.) Click on "Advanced" then "VLAN Membership"
5.) Choose VLAN ID in drop down list (i.e. "300")
6.) Then Click on "Port" purple hyperlink.
7.) Make sure "U" is specified for the Shoretel phone that is plugged in.
8.) Click Apply
9.) Click on "Port PVID Configuration" in left hand column.
10.) Check the g interace number the phone is plugged into. (This will prefill the Interface field).
11.) Change the PVID (1 to 4093) to the VLAN you want it to be (i.e. "300")
12.) Click Apply
#58
Exchange Server / Use Google Migration Tool to I...
Last post by bflores - October 23, 2014, 02:51:39 PM(USING GOOGLE MIGRATION EWS ONLINE IMPORT TOOL)
Source: https://support.google.com/a/answer/6003165?hl=en
1.) Open Exchange Management Shell
2.) New-ManagementRoleAssignment –Name:impersonationAssignmentName –Role:ApplicationImpersonation –User:administrator
3.) Get-WebServicesVirtualDirectory|fl
4.) Copy EWS Eternal URL
5.) Go to admin.google.com
6.) Migrations
7.) Choose Exchange 2010 using Exchange EWS
8.) Paste EWS External URL from step 4
9.) Next
10.) Make sure the users "default SMTP email address" for "Exchange Email" field is listed.
11.) Start Import
Source: https://support.google.com/a/answer/6003165?hl=en
1.) Open Exchange Management Shell
2.) New-ManagementRoleAssignment –Name:impersonationAssignmentName –Role:ApplicationImpersonation –User:administrator
3.) Get-WebServicesVirtualDirectory|fl
4.) Copy EWS Eternal URL
5.) Go to admin.google.com
6.) Migrations
7.) Choose Exchange 2010 using Exchange EWS
8.) Paste EWS External URL from step 4
9.) Next
10.) Make sure the users "default SMTP email address" for "Exchange Email" field is listed.
11.) Start Import
#59
Exchange Server / Exchange 2010 - How to Export ...
Last post by bflores - October 23, 2014, 02:34:31 PM(HOW TO GET MAILBOX SIZES)
Get-MailboxStatistics -Server e-mail | Select DisplayName, ItemCount, TotalItemSize | Sort-Object TotalItemSize -Descending
(PRE-REQUIREMENTS)
1.) Open Exchange Management Shell
2.) New-ManagementRoleAssignment –Role "Mailbox Import Export" –User Administrator
3.) Close EMS and Reopen
4.) Export Exchange Users list to a Tab Delimited .txt file.
5.) Formula for Excel: ="New-MailboxExportRequest -Mailbox "&B2&" -FilePath \\e-mail\pst\"&B2&".pst"
(EXPORT ALL MAILBOXES TO PSTs)
New-MailboxExportRequest -Mailbox user1 -FilePath \\e-mail\pst\user1.pst
New-MailboxExportRequest -Mailbox user2 -FilePath \\e-mail\pst\user2.pst
New-MailboxExportRequest -Mailbox user3 -FilePath \\e-mail\pst\user3.pst
New-MailboxExportRequest -Mailbox user4 -FilePath \\e-mail\pst\user4.pst
New-MailboxExportRequest -Mailbox user5 -FilePath \\e-mail\pst\user5.pst
(HOW TO GET MAILBOX EXPORT REQUESTS)
Get-MailboxExportRequest
Get-MailboxStatistics -Server e-mail | Select DisplayName, ItemCount, TotalItemSize | Sort-Object TotalItemSize -Descending
(PRE-REQUIREMENTS)
1.) Open Exchange Management Shell
2.) New-ManagementRoleAssignment –Role "Mailbox Import Export" –User Administrator
3.) Close EMS and Reopen
4.) Export Exchange Users list to a Tab Delimited .txt file.
5.) Formula for Excel: ="New-MailboxExportRequest -Mailbox "&B2&" -FilePath \\e-mail\pst\"&B2&".pst"
(EXPORT ALL MAILBOXES TO PSTs)
New-MailboxExportRequest -Mailbox user1 -FilePath \\e-mail\pst\user1.pst
New-MailboxExportRequest -Mailbox user2 -FilePath \\e-mail\pst\user2.pst
New-MailboxExportRequest -Mailbox user3 -FilePath \\e-mail\pst\user3.pst
New-MailboxExportRequest -Mailbox user4 -FilePath \\e-mail\pst\user4.pst
New-MailboxExportRequest -Mailbox user5 -FilePath \\e-mail\pst\user5.pst
(HOW TO GET MAILBOX EXPORT REQUESTS)
Get-MailboxExportRequest
#60
Windows Server / How to manually change Windows...
Last post by admin - August 07, 2014, 01:38:40 PM(HOW TO MANUALLY CHANGE WINDOWS UPDATE SOURCE)
How to change the source for windows updates. Can be a windows update server on a domain, or from the internet. You can tell the source by opening Windows Update and check the "You receive updates".
"Managed by your system administrator" = pulls from local Windows Update domain server.
"For Windows and other products from Microsoft Update" = pulls from Microsoft Update Servers on Internet.
(USE LOCAL DOMAIN UPDATE SERVERS)
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU]
"UseWUServer"=dword:00000001
(USE MICROSOFT UPDATE SERVER ON THE INTERNET)
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU]
"UseWUServer"=dword:00000000
NOTE: After making changes. Restart the "Windows Update" service (or reboot PC), for changes to take effect.
How to change the source for windows updates. Can be a windows update server on a domain, or from the internet. You can tell the source by opening Windows Update and check the "You receive updates".
"Managed by your system administrator" = pulls from local Windows Update domain server.
"For Windows and other products from Microsoft Update" = pulls from Microsoft Update Servers on Internet.
(USE LOCAL DOMAIN UPDATE SERVERS)
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU]
"UseWUServer"=dword:00000001
(USE MICROSOFT UPDATE SERVER ON THE INTERNET)
[HKEY_LOCAL_MACHINE\SOFTWARE\Policies\Microsoft\Windows\WindowsUpdate\AU]
"UseWUServer"=dword:00000000
NOTE: After making changes. Restart the "Windows Update" service (or reboot PC), for changes to take effect.