Recent posts

[(HOW TO ENABLE USB USB FIDO2 KEY TO AZURE OR OFFICE 365)]

#21

Azure / How to Enable USB FIDO2 Key Su...

Last post by bflores - October 04, 2021, 08:40:29 PM

(HOW TO ENABLE USB USB FIDO2 KEY TO AZURE OR OFFICE 365)
1.) portal.azure.com
2.) Azure Active Directory
3.) Security
4.) Authentication methods
5.) FIDO2 Security Key settings
6.) Enable

#22

Aruba Networks / Configure NTP to Aruba Switche...

Last post by bflores - May 18, 2021, 10:32:58 AM

How to configure HP / Aruba Networks NTP timesync on 2930f 2930m switches.

Code Select Expand


config
ip dns server-address priority 1 8.8.8.8
ip dns server-address priority 2 8.8.4.4
timesync ntp
ntp unicast
ntp server-name us.pool.ntp.org iburst
time daylight-time-rule continental-us-and-canada
time timezone -420
ntp enable


to view

Code Select Expand


show ntp status
show time


#23

Windows / Create user and add to group v...

Last post by bflores - May 14, 2021, 09:29:39 AM

Create user and add to group via Windows Command Line

Code Select Expand

net user %username% %password% /add

net localgroup %group% %username% /add

wmic useraccount WHERE "Name='%username%'" set PasswordExpires=false

[(DEFAULT IP, USER AND PASSWORD)]

#24

Aruba Networks / Aruba Networks Instant ON Swit...

Last post by bflores - April 22, 2021, 11:48:39 AM

(DEFAULT IP, USER AND PASSWORD)
192.168.1.1 (if no DHCP is present)
admin:nopassword

(DATASHEETS)
Aruba_Instant_On_1930_Switch_Series_Datasheet.pdf
Aruba Instant On AP25 Data Sheet-a00121118enw.pdf 

(FACTORY RESET)
To execute the factory default reset on the switch, perform these steps:
1. Using a small, thin tool with blunt ends (such as a paper clip), press the Reset button on the front of the switch.
2. Continue to press the Reset button until the UID LED light begins to flash.
3. Release the Reset button.
The switch will then complete its self test and begin operating with its configuration restored to the factory default settings. After completing this procedure, there will be no password, the IP address will be returned to the default 192.168.1.1, and all configuration settings will be returned to factory defaults.

(ARUBA INSTANT ON APS)
R4W01A Aruba Instant On AP22 (US) 2X2 1.8Gbps - $150
R9B27A Aruba Instant On AP25 (US) 4x4 4.8Gbps - $239
R9B32A Aruba Instant On AP25 with 12V/18W Power Adaptor US Bundle

(ARUBA INSTANT ON 1930 SWITCH SERIES - WOULD NOT USE)
JL680A Aruba Instant On 1930 8G 2SFP Switch 8 2 SFP -
JL682A Aruba Instant On 1930 24G 4SFP/SFP+ Switch 24 4 SFP/SFP+ -
JL685A Aruba Instant On 1930 48G 4SFP/SFP+ Switch 48 4 SFP/SFP+ -
JL683A Aruba Instant On 1930 24G Class4 PoE 4SFP/SFP+ 195W Switch 24 4 SFP/SFP+ 195W

(ARUBA INSTANT ON 1930 SWITCH SERIES - POE)
JL681A Aruba Instant On 1930 8G Class4 PoE 2SFP 124W Switch 8 2 SFP 124W
JL684B Aruba Instant On 1930 24G Class4 PoE 4SFP/SFP+ 370W Switch 24 4 SFP/SFP+ 370W
JL686B Aruba Instant On 1930 48G Class4 PoE 4SFP/SFP+ 370W Switch 48 4 SFP/SFP+ 370W

(ARUBA INSTANT ON 1960 SWITCH SERIES - POE)
JL807A Aruba Instant On 1960 24G 20p Class4 4p Class6 PoE 2XGT 2SFP+ 370W Switch
JL809A Aruba Instant On 1960 48G 40p Class4 8p Class6 PoE 2XGT 2SFP+ 600W Switch

(ADD ONS 2022)
Aruba Instant On 1G SFP LC SX 500m OM2 MMF Transceiver (R9D16A) - 1,640ft
Aruba Instant On 10G SFP+ LC SR 300m OM3 MMF Transceiver (R9D18A) - 984ft
Aruba Instant On 10G SFP+ to SFP+ 1m DAC (R9D19A) - 3ft
Aruba Instant On 10G SFP+ to SFP+ 3m DAC (R9D20A) - 10ft
Aruba 1G SFP LC LX 10km SMF Transceiver (J4859D) - 6.2 miles
Aruba 10G SFP+ LC LR 10km SMF Transceiver (J9151E) - 6.2 miles

(OLD ADD ONS)
Aruba 1G SFP LC SX 500m MMF XCVR (J4858D)
Aruba 10G SFP+ LC SR 300m MMF Transceiver (J9150D)
Aruba 10G SFP+ to SFP+ 1m DAC (J9281D)
Aruba 10G SFP+ to SFP+ 3m DAC (J9283D)

#25

Aruba Networks / Aruba Networks 2930 POE SKUs

Last post by bflores - March 19, 2021, 05:22:57 PM

JL261A 24G 370W/POE+ 4SFP
JL255A 24G 370W/POE+ 4SFP+
-
JL262A 48G 370W/POE+ 4SFP
JL256A 48G 370W/POE+ 4SFP+
-
JL557A 48G 740W/POE+ 4SFP
JL558A 48G 740W/POE+ 4SFP+

#26

Office / Registry Key Outlook to not us...

Last post by bflores - January 07, 2021, 04:06:21 PM

1. Shut down Outlook and set the following registry key.
HKCU\SOFTWARE\Microsoft\Office\16.0\Common\Identity\
REG_DWORD (32Bit)
EnableADAL
0

#27

Office / 07-15-2020 - Users experiencin...

Last post by bflores - July 15, 2020, 12:34:09 PM

07-15-2020 - Users experiencing Outlook connection issues and crashes Fix

#28

Other / POE Chart

Last post by bflores - June 09, 2020, 10:16:51 AM

[(MANUALLY PROVISION 8X8 PHONE INTO PRODUCTION)]

#29

8x8 / Manually Provision 8x8 Phone I...

Last post by bflores - March 02, 2020, 12:32:45 PM

(MANUALLY PROVISION 8X8 PHONE INTO PRODUCTION)
1. In a web browser on a computer on the same network as the phone, browse to the phone's IP address.
2. Log in as admin and enter the password 456.
3. Navigate to Settings > Provisioning Server.
4. From the Server Type drop-down, select HTTPS.
5. In the Server Address field, enter the 8x8 Polycom Provisioning Server address: pccfg.8x8.com/polycomuc/
6. Save.
7. Allow several minutes for the phone to reboot and connect to the 8x8 servers. When rebooting is complete, continue on to activate your phone.

[(RESET 8x8 PHONE TO FACTORY DEFAULTS)]

#30

8x8 / Reset 8x8 Phone to Factory Def...

Last post by bflores - March 02, 2020, 12:28:19 PM

(RESET 8x8 PHONE TO FACTORY DEFAULTS)
1. In a web browser on a computer on the same network as the phone, browse to the phone's IP address.
2. Log in as Admin and enter the phone's MAC password. Device information and MAC password can be found in Account Manager and Configuration Manager.
3. Navigate to Utilities > Phone Backup & Restore.
4. Click the small + to open the Global Settings options.
5. Click Restore to reset the phone to factory default settings.
6. Wait for phone to reboot.
Note: After the phone has been reset to factory default settings, the administrator password will have changed to 456.